How to Oil a Paper Shredder with Vegetable Oil
Investing in a paper shredder for the home or office is one of the best choices you can make. With it, you can clear your place from paper waste and gives you security at the same time.
The machine destroys sensitive documents before you throw it away and keeps prying eyes away from your information. Maybe you already have one or planning to get one—the fact remains it can become clogged with dust caused by the paper.
Eventually, it stops working, so keep it running smoothly you need to oil it regularly. One of the best ways to do this is with vegetable oil.
Not only will it keep the blades working well it is more affordable to buy than the brand shredding lubricants available. However, before you head out and buy some oil, you first need to find out which one works best for your paper shredder.
Get the inside news right here from the oil you need to use to how to oil the machine.
What is Vegetable Oil
You can find different vegetable oils on the market made from various seeds. The common one is the rapeseed or canola oil. Other lubricants you find is corn, peanut, soybean, sunflower, safflower, and more.
Furthermore, you get olive oil and coconut oil so which one works best to oil a paper shredder. Yes, we know you want to use a hobby oil or perhaps WD-40 instead.
Alternatively, your manufacturer recommends using the correct shredder oil as it is heat tolerant. These oils can cost a bit, and one of the best lubricants to use is canola oil.
The truth is that many well-known brands are using canola oil, and Fellowes is one of them. What makes the lubricant unique is that it’s smoke point depending on the quality can range from 225° F to 435° F.
These temperatures are above the heat tolerance of most shredding machines. Therefore, if you have an old one standing at home, grab the bottle of canola standing in the cupboard and try it.
How to Lubricate a Paper Shredder
By oiling the paper shredder, it keeps the blades running smoothly and helps prevent jams. There are different ways to lubricate the machine.
One of the first methods is using a shredder oil sheet passed through the paper slot. An alternative approach is manual oiling with lubricant we will discuss here:
Using Paper to Oil the Machine
Take an A4 paper and place it on a surface that you can clean off the oil. A fact is that some of the lubricants will spill. If your equipment is still under warranty, we recommend using the manufactured-approved oil.
Alternatively, you can use vegetable oil instead and apply it in a zigzag pattern on one side of the paper. Do not saturate the piece of paper, as it will become messy further on in the process.
Try to stretch the zigzag pattern from the one side to the other, giving it sufficient coverage. Turn the shredder on and shred the oil-covered paper through the machine.
As the oil passes through the feed slot, the blades become coated with the oil. It helps redistribute to keep it running smoothly. Always make sure the papers not damaged or creased as it can cause a malfunction with the paper shredder.
Now pass through a couple more papers to help absorb the excess oil on the blades.
Oiling the Paper Shredder without Using Paper
As per the instructions mentioned, use either the manufacturer-approved oil or vegetable oil as needed. The first steps to set the appliance to the manual mode allowing you to control the direction of the rotation and time of the blades moving.
If you are using canola oil, get yourself a handy bottle with a long nozzle to squirt the oil along the paper entry line. Before doing this, make sure the apparatus is off and squirt lengthwise across the entry slot.
Now run the shredder for up to 20-seconds in the reverse mode before you stop the blades. Doing this helps spread the lubricant around the whole cutting assembly.
Once done, put the manual mode of and switch it to auto and start the shredder as usual. Complete the process by feeding through a couple of sheet of paper to remove the excess oil.
Paper Shredder Oil: What is it made off?
According to different manufacturers, the oil used to lubricate paper shredders has a unique formulation. The oil is lightweight and has the same uniformity as vegetable oil.
However, it is not a vegetable oil as many believe. According to different brands, they do not recommend using the oil, as it tends to gum up over time, making it smell like fries.
Furthermore, never clean the shredder with Kerosene as it poses a health risk while WD-40 is not suitable for long-term use and too lightweight.
Therefore, after digging into some Material Safety Data Sheets (MSDS) from different brands, we found the following:
- You can find up to 98% of Shell Base Oil
- Up to 40% Solvent Refined Hydrotreated Middle Distillate
- 70% Severely Hydrotreated Light Naphthenic Distillate
- More than 0.2% Butylated Hydroxy Toluene
A further note is that the oil contains no PCB, as stated by the ASTM D4059. Lastly, you get up to 8% Commercial Oleic Acid.
Therefore, with the formulation, it works effectively to keep the shredder running all the time smoothly. Now that you identify the ins and outs about how to oil a paper shredder with vegetable oil, the choice is up to you which one you choose.